MÁY CÔNG CỤ
PHỤ TÙNG, DỊCH VỤ MÁY DẬP, KHUÔN DẬP
LƯỠI CƯA, DỤNG CỤ CẮT, LINH KIỆN KHUÔN DẬP
CÔNG TRÌNH & DỰ ÁN TIÊU BIỂU
HỖ TRỢ TRỰC TUYẾN
☎ Hotline: 0912.333.774
Sales: 0903.221.682
MÁY CẮT ĐỘT LIÊN HỢP / IRON WORKER - SINGLE CYLINDER
Giá: Liên hệ
Single Cylinder
The IW features the "Z" shape aperture at the angle shear station, which makes this model capable of doing both the internal and external miter shear on angles. The round/square bar shearing on this model is a stand-alone station that has large shearing capability.
The IW features the "Z" shape aperture at the angle shear station, which makes this model capable of doing both the internal and external miter shear on angles. The round/square bar shearing on this model is a stand-alone station that has large shearing capability.
Chi tiết sản phẩm
| Model | IW-45M | IW-50A | IW-60H |
| Punching | |||
| Punching Pressure | 45 Ton | 50 Ton | 60 Ton |
| Punch Capacity | ø22 x 15 | ø20 x 18 | ø28 x 15 |
| (Diameter x Thickness) | ø40 x 8 | ø40 x 9 | ø40 x 11 |
| Throat Depth | 175 | 180 | 220 |
| Max. Stroke Length | 35 | 42 | 55 |
| Cycles / Min. (15mm stroke) | 31 | 24 | 29 |
| Working Height Up to Die | 970 | 840 | 1000 |
| Angle Shearing | |||
| At 90° Shearing | 80 x 80 x 8 | 100 x 100 x 10 | 100 x 100 x 13 |
| At 45° Miter Shearing | 50 x 50 x 6 | 65 x 65 x 8 | 80 x 80 x 8 |
| Working Height | 1120 | 850 | 1236 |
| Flat Shearing | |||
| Flat Bar Shearing | 350 x 8 | 300 x 12 | 350 x 15 |
| (Width x Thickness) | 180 x 12 | 200 x 18 | 210 x 20 |
| Blade Length | 360 | 310 | 360 |
| Angle Flange Trim | 75 | 100 | 100 |
| Working Height | 970 | 1150 | 1006 |
| Bar Shearing | |||
| Round Bar Shear | ø25 | ø32 | ø40 |
| Square Bar Shear | 25 x 25 | 30 x 30 | 38 x 38 |
| Channel Shear | - | 76* | 102* |
| I Beam Shear | - | 76* | 102* |
| Working Height | 1190 | 880 | 1260 |
| Notching | |||
| Rectangular Notcher (W x D x T) | 50.8 x 90 x7** | 50.8 x 90 x 7 | 50.8 x 90 x 8 |
| Vee-Notcher (Side x Side x T) | 90 x 90 x 8* | 90 x 90 x 8* | 90 x 90 x 10* |
| Working Height | - | 1150 | 1006 |
* : Optional Tooling
** : On IW-45M the notcher is optional tooling to be installed at the punching station.
Note: Based on low carbon / mild steel material strength of 45kg / mm² tensile. Design and specifications subject to change without notice. A 1-hole die holder and a 2-piece gauging table are provided as standard equipment on all single cylinder models.
